Please login or register. August 20, 2019, 03:33:29 AM

Author Topic: Reduce Serial Port Buad Rate  (Read 12650 times)

0 Members and 1 Guest are viewing this topic.


  • Jr. Member
  • **
  • Posts: 6
  • Karma: +0/-0
Reduce Serial Port Buad Rate
« on: November 25, 2006, 08:41:12 AM »
i would like to know which buad rate better for hacmp configuration,because i recieved errpt with ID Number 9D30B78E .
the baud rate now is 9600 and when i did errpt -a -j 9D30B78E recommended to "reduce Serial Port Buad Rate"



  • Administrator
  • Hero Member
  • *****
  • Posts: 1139
  • Karma: +0/-0
Re: Reduce Serial Port Buad Rate
« Reply #1 on: November 27, 2006, 03:32:45 PM »
9600 Baud rate should be fine, unless you have a very long serial line (and then I mean 500 to 1000 meters long).

You can change the speed using

smitty chtty

select the correct tty device, and set the new speed. I would suggest 4800. If the problem continues, lower by half again, etc..

However, more probably there is a problem with your cable, or another setting.